libvirt-daemon-config-network-2.2.0-1.el6>  HLk|XL z뾂alz$g!@eO_{\/ʮ"Tޢ&ރz+C$NH]+bFl_ #Q)hܞMu V0~n&g)liI|~*W} >-=ROl 'F<% +NER}o 23k*j[bnvAv-{MgKf`Vfl,l/'-KjP ,kBLK\\TR"hq5e4ff1d34a20675d15893799b77745754c6b5668XL z뾂al\uic7id*ewPz@;ڣp>DOmZ0B`TF1xE,6v~)~8(!AmV F>,xcRo쮲Ko 'w4~!DDŽ\̶ N J-q}GR-0rfl* 1+؀ l>ON:?d & , ` "$, 0 4 < ~  (89 :=L>1G<HDILXPYX\p]x^bd6e;f>l@tXu`vhwxClibvirt-daemon-config-network2.2.01.el6Default configuration files for the libvirtd daemonDefault configuration files for setting up NAT based networkingXmc1bj.rdu2.centos.orgCentOSCentOSLGPLv2+CBS Development/Librarieshttp://libvirt.org/linuxx86_64if test $1 -eq 1 && test ! -f /etc/libvirt/qemu/networks/default.xml ; then # see if the network used by default network creates a conflict, # and try to resolve it # NB: 192.168.122.0/24 is used in the default.xml template file; # do not modify any of those values here without also modifying # them in the template. orig_sub=122 sub=${orig_sub} nl=' ' routes="${nl}$(ip route show | cut -d' ' -f1)${nl}" case ${routes} in *"${nl}192.168.${orig_sub}.0/24${nl}"*) # there was a match, so we need to look for an unused subnet for new_sub in $(seq 124 254); do case ${routes} in *"${nl}192.168.${new_sub}.0/24${nl}"*) ;; *) sub=$new_sub break; ;; esac done ;; *) ;; esac UUID=`/usr/bin/uuidgen` sed -e "s/${orig_sub}/${sub}/g" \ -e "s,,\n $UUID," \ < /usr/share/libvirt/networks/default.xml \ > /etc/libvirt/qemu/networks/default.xml ln -s ../default.xml /etc/libvirt/qemu/networks/autostart/default.xml # Make sure libvirt picks up the new network defininiton /sbin/service libvirtd condrestart > /dev/null 2>&1 || : fiA큤XmaXmaa3f67a652ed4f77d2b202ef8eabcc08f80c452ea06532c73780b144bf688877arootrootrootrootlibvirt-2.2.0-1.el6.src.rpmlibvirt-daemon-config-networklibvirt-daemon-config-network(x86-64)    /bin/shlibvirt-daemonlibvirt-daemon-driver-networkrpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)2.2.0-1.el62.2.0-1.el63.0.4-14.6.0-14.0-15.2-14.8.0Xk@W^@W@W\@Wv[@W^@WUeW>@W'A@WW@WKV@V@VՄ@V=@V%@Vs@VhVC-VO@VqU@UpUU@U@UUVUUlI@UlI@UY@UKSUG_@UG_@U.RU/@TTPTи@T}T@To)@Tg@@TWn@TR(@T6xT.T"@T!`T@TwTT S@SSS@SSg@ShSG@S:@S0@SnRJ@Ra@Rv@R@Rw@RQPRJ@RA~R@-@R9R$}RZ@R q@QQQ@Q@Qޞ@Qo@QQQ@QQ'@QQU@QYvQ5@Q/FQ@Q @QQh@P@P9@P @P @PP@PP)P`K@P`K@P\VPQPPy@PG>P@@P>@P6@P*=P*=P"TP - 2.2.0-1Daniel P. Berrange - 2.2.0-1Daniel P. Berrange - 2.1.0-1Richard W.M. Jones - 2.0.0-2Daniel P. Berrange - 2.0.0-1Richard W.M. Jones - 1.3.5-2Daniel P. Berrange - 1.3.5-1Cole Robinson - 1.3.4-2Cole Robinson - 1.3.4-1Cole Robinson - 1.3.3-3Cole Robinson - 1.3.3-2Cole Robinson - 1.3.3-1Cole Robinson - 1.3.2-3Richard W.M. Jones - 1.3.2-2Daniel Berrange - 1.3.2-1Fedora Release Engineering - 1.3.1-2Daniel Berrange - 1.3.1-1George Dunlap - 1.3.0-1Daniel Veillard - 1.3.0-1Cole Robinson - 1.2.21-1Cole Robinson - 1.2.20-2Daniel P. Berrange - 1.2.20-1George Dunlap - 1.2.15-104George Dunlap - 1.2.15-4Daniel P. Berrange - 1.2.19-1Daniel P. Berrange - 1.2.18-1Richard W.M. Jones - 1.2.17-2Cole Robinson - 1.2.17-1Peter Robinson 1.2.16-3Daniel P. Berrange - 1.2.16-2Daniel P. Berrange - 1.2.16-1Daniel Veillard - 1.2.16-1George Dunlap - 1.2.15-3Richard W.M. Jones - 1.2.15-2Daniel Veillard - 1.2.15-1Cole Robinson - 1.2.15-1Cole Robinson - 1.2.14-2Cole Robinson - 1.2.14-1Cole Robinson - 1.2.13-2Cole Robinson - 1.2.13-1Daniel P. Berrange - 1.2.12-2Daniel P. Berrange - 1.2.12-1Daniel P. Berrange - 1.2.11-1Cole Robinson - 1.2.10-3Cole Robinson - 1.2.10-2Daniel Veillard - 1.2.10Cole Robinson - 1.2.9-4Cole Robinson - 1.2.9-3Cole Robinson - 1.2.9-2Cole Robinson - 1.2.8-6Cole Robinson - 1.2.8-5Cole Robinson - 1.2.8-4Cole Robinson - 1.2.8-3Cole Robinson - 1.2.8-2Daniel P. Berrange - 1.2.8-1Fedora Release Engineering - 1.2.7-2Cole Robinson - 1.2.7-1Peter Robinson 1.2.6-2Daniel P. Berrange - 1.2.6-1Fedora Release Engineering - 1.2.5-2Daniel P. Berrange - 1.2.5-1Cole Robinson - 1.2.4-1Cole Robinson - 1.2.3-2Cole Robinson - 1.2.3-1Cole Robinson - 1.2.2-2Daniel P. Berrange - 1.2.2-1Cole Robinson - 1.2.1-2Daniel P. Berrange - 1.2.1-1Daniel P. Berrange - 1.2.0-1Cole Robinson - 1.1.4-2Daniel Veillard - 1.1.4-1Cole Robinson - 1.1.3-2Daniel Veillard - 1.1.3-1Cole Robinson - 1.1.2-4Cole Robinson - 1.1.2-3Daniel P. Berrange - 1.1.2-2Daniel P. Berrange - 1.1.2-1Cole Robinson - 1.1.1-3Cole Robinson - 1.1.1-2Daniel P. Berrange - 1.1.1-1Dennis Gilmore - 1.1.0-5Cole Robinson - 1.1.0-4Daniel P. Berrange - 1.1.0-3Cole Robinson - 1.1.0-2Daniel Veillard - 1.1.0-1Peter Robinson 1.0.6-3Cole Robinson - 1.0.6-2Daniel P. Berrange - 1.0.6-1Cole Robinson - 1.0.5.1-1Cole Robinson - 1.0.5-3Richard W.M. Jones - 1.0.5-2Daniel Veillard - 1.0.5-1Daniel Veillard - 1.0.4-1Daniel P. Berrange - 1.0.3-1Richard W.M. Jones - 1.0.2-4Daniel P. Berrange - 1.0.2-2Daniel P. Berrange - 1.0.2-1Cole Robinson - 1.0.1-6Cole Robinson - 1.0.1-5Richard W.M. Jones - 1.0.1-4Daniel P. Berrange - 1.0.1-3Cole Robinson - 1.0.1-2Daniel Veillard - 1.0.1-1Daniel P. Berrange - 1.0.0-1Cole Robinson - 0.10.2.1-2Cole Robinson - 0.10.2.1-1Cole Robinson - 0.10.2-4Richard W.M. Jones - 0.10.2-3Daniel Veillard - 0.10.2-1Richard W.M. Jones - 0.10.1-5Richard W.M. Jones - 0.10.1-4Cole Robinson - 0.10.1-3Daniel P. Berrange - 0.10.1-2Daniel Veillard - 0.10.1-1Daniel Veillard - 0.10.0-1Daniel Veillard - 0.10.0-0rc1Daniel P. Berrange - 0.10.0-0rc0.2Daniel Veillard - 0.10.0-0rc0.1Daniel Veillard - 0.10.0-0rc0Richard W.M. Jones - 0.9.13-3Fedora Release Engineering - 0.9.13-2Daniel Veillard - 0.9.13-1Daniel Veillard - 0.9.12-1Cole Robinson - 0.9.11.3-1Daniel P. Berrange - 0.9.11-1Daniel P. Berrange - 0.9.10-4Daniel P. Berrange - 0.9.10-3Daniel P. Berrange - 0.9.10-2Daniel P. Berrange - 0.9.10-1Daniel P. Berrange - 0.9.9-2Daniel Veillard - 0.9.9-1Daniel P. Berrange - 0.9.8-2Daniel Veillard - 0.9.8-1Justin M. Forbes - 0.9.7-3Daniel P. Berrange - 0.9.7-2Daniel P. Berrange - 0.9.7-1Dan Horák - 0.9.6-3Laine Stump - 0.9.6-2Daniel Veillard - 0.9.6-1Daniel Veillard - 0.9.5-1Daniel Veillard - 0.9.4-1Dan Hor?k - 0.9.3-3Peter Robinson - 0.9.3-2Daniel Veillard - 0.9.3-1Richard W.M. Jones - 0.9.2-3Laine Stump - 0.9.2-2Daniel Veillard - 0.9.2-1Richard W.M. Jones - 0.9.1-3Daniel Veillard - 0.9.1-1Daniel Veillard - 0.9.0-1Daniel Veillard - 0.8.8-3Daniel P. Berrange - 0.8.8-2Daniel Veillard - 0.8.8-1Fedora Release Engineering - 0.8.7-2Daniel Veillard - 0.8.7-1Daniel Veillard - 0.8.5-1jkeating - 0.8.4-3Dan Horák - 0.8.4-2Daniel Veillard - 0.8.4-1Daniel P. Berrange - 0.8.3-2Daniel P. Berrange - 0.8.3-1David Malcolm - 0.8.2-3Daniel P. Berrange - 0.8.2-2Daniel Veillard - 0.8.2-1Daniel Veillard - 0.8.1-1Daniel Veillard - 0.8.0-1Richard W.M. Jones - 0.7.7-3.fc14Cole Robinson - 0.7.7-2.fc14Daniel Veillard - 0.7.7-1Adam Jackson 0.7.6-2Daniel Veillard - 0.7.6-1Chris Weyl 0.7.5-3Daniel P. Berrange - 0.7.5-2Daniel Veillard - 0.7.5-1Daniel Veillard - 0.7.4-1Daniel P. Berrange - 0.7.2-6Daniel P. Berrange - 0.7.2-5Daniel P. Berrange - 0.7.2-4Mark McLoughlin - 0.7.2-3Mark McLoughlin - 0.7.2-2Daniel Veillard - 0.7.2-1Mark McLoughlin - 0.7.1-12Mark McLoughlin - 0.7.1-11Mark McLoughlin - 0.7.1-10Mark McLoughlin - 0.7.1-9Mark McLoughlin - 0.7.1-8Mark McLoughlin - 0.7.1-7Chris Weyl - 0.7.1-6Mark McLoughlin - 0.7.1-5Mark McLoughlin - 0.7.1-4Daniel Veillard - 0.7.1-3Daniel Veillard - 0.7.1-2Daniel Veillard - 0.7.1-1Mark McLoughlin - 0.7.1-0.2.gitfac3f4cMark McLoughlin - 0.7.1-0.1.gitg3ef2e05Mark McLoughlin - 0.7.0-6Mark McLoughlin - 0.7.0-5Daniel P. Berrange - 0.7.0-4Mark McLoughlin - 0.7.0-3Mark McLoughlin - 0.7.0-2Daniel Veillard - 0.7.0-1Daniel Veillard - 0.6.5-1Daniel Veillard - 0.6.4-1Daniel Veillard - 0.6.3-1Daniel Veillard - 0.6.2-1Daniel Veillard - 0.6.1-1Daniel Veillard - 0.6.0-1Daniel Veillard - 0.5.0-1Daniel Veillard - 0.4.6-1Daniel Veillard - 0.4.5-1Daniel Veillard - 0.4.4-1Daniel Veillard - 0.4.3-1Daniel Veillard - 0.4.2-1Daniel Veillard - 0.4.1-1Daniel Veillard - 0.4.0-1Daniel Veillard - 0.3.3-1Daniel Veillard - 0.3.2-1Daniel Veillard - 0.3.1-1Daniel Veillard - 0.3.0-1Daniel Veillard - 0.2.3-1Daniel Veillard - 0.2.2-1Jeremy Katz - 0.2.1-2.fc7Daniel Veillard - 0.2.1-1Daniel P. Berrange - 0.2.0-4.fc7Daniel P. Berrange - 0.2.0-3.fc7Daniel P. Berrange - 0.2.0-2.fc7Daniel Veillard 0.2.0-1.fc7Daniel Veillard 0.1.11-1.fc7Daniel Veillard 0.1.10-1.fc7Jeremy Katz - 0.1.9-2Daniel Veillard 0.1.9-1Daniel Veillard 0.1.8-3Daniel Veillard 0.1.8-2Daniel Veillard 0.1.8-1Daniel Veillard 0.1.7-1Daniel Veillard 0.1.6-1Jeremy Katz - 0.1.5-3Daniel Veillard 0.1.5-2Daniel Veillard 0.1.5-1Daniel Berrange - 0.1.4-5Jeremy Katz - 0.1.4-4Daniel Veillard 0.1.4-3Daniel Veillard 0.1.4-2Daniel Veillard 0.1.4-1Jeremy Katz - 0.1.3-6Jeremy Katz - 0.1.3-5Jeremy Katz - 0.1.3-4Daniel Veillard 0.1.3-3Mark McLoughlin - 0.1.3-2Jesse Keating - 0.1.3-1.1Daniel Veillard 0.1.3-1Daniel Veillard 0.1.2-1Daniel Veillard 0.1.1-1Daniel Veillard 0.1.0-1Daniel Veillard 0.0.6-1Daniel Veillard 0.0.5-1Daniel Veillard 0.0.4-1Daniel Veillard 0.0.3-1Daniel Veillard 0.0.2-1Daniel Veillard 0.0.1-1- Merge Xen changes- Rebase to version 2.2.0- Rebase to version 2.1.0- Rebuild to attempt to fix 'nothing provides libxenctrl.so.4.6()(64bit) needed by libvirt-daemon-2.0.0-1.fc25.x86_64'- Rebase to version 2.0.0 - Temporarily disable wireshark plugin due to broken wireshark headers (rhbz #1351984)- Rebuild against new glibc (see https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/VUOTESHSWFRCYPXIVG6BSMAUITS7QCK2/).- Rebase to version 1.3.5 - Pull in refactored, simplified spec file from upstream- Fix libxl video config via virt-install (bz #1334557) - Advertise fedora edk2 firmware builds to apps (bz #1335395)- Rebased to version 1.3.4- Fix 200ms performance problem when waiting for monitor socket of new domains.- libvirt assigns same address to two PCI devices (bz #1325085) - Fix build with -Werror- Rebased to version 1.3.3- Fix qemu:///session disconnect after 30 seconds - Fix 'permission denied' errors trying to unlink disk images (bz #1289327) - Fix qemu:///session connect race failures (bz #1271183) - driver: log missing modules as INFO, not WARN (bz #1274849)- Add fix for RHBZ#1315606.- Update to 1.3.2 release- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild- Update to 1.3.1 release- Enable xen4centos settings- virt-admin and administration API - various improvements in virtio devices support - log daemon, logging improvements and protocol - many bug fixes and improvements- Update to 1.2.21 release- Rebuild for xen 4.6- Update to 1.2.20 release- Gratuitious offset to build against Xen 4.6- Port to aarch64- Update to 1.2.19 release- Update to 1.2.18 release- Fix 'Cannot write data: Broken pipe [code=38 domain=7]' (RHBZ#1247746).- numerous improvements and refactoring of the parallels driver - hardening of vcpu code - hardening of migration code - a lot of improvement and bug fixes- Rebuild (aarch64)- Rebuild for libwsman soname bump- Update to 1.2.16 release- Introduce pci-serial - Introduce virDomainSetUserPassword API - libvirt: Introduce protected key mgmt ops - add domain vmport feature - various bug fixes and improvements- Turn on with_xen and with_libxl for RHEL (CentOS)- Add Cole Robinson\'s patch to fix arch selection (bz# 1219198, bz#1219191)- Implement virDomainAddIOThread and virDomainDelIOThread - libxl: Introduce configuration file for libxl driver - Add VIR_DOMAIN_EVENT_ID_DEVICE_ADDED event - various improvements to parallels driver - a lot of improvement and bug fixes- Rebased to version 1.2.15- Fix LXC domain startup (bz #1210397) - Fix race starting multiple session daemons (bz #1200149) - Fix change-media success messages - Strip invalid control codes from XML (bz #1066564, bz #1184131)- Rebased to version 1.2.14- Fix connecting to qemu:///session (bz #1198244)- Rebased to version 1.2.13 - lot of improvements around NUMA code - a lot of improvement and bug fixes- Rebuild for changed xen soname- Update to 1.2.12 release- Update to 1.2.11 release - Use git to apply patches- Allow arm/aarch64 with UEFI- Fix caps probing when KVM is disabled (bz #1160318) - ppc64le fixes (bz #1163439)- upstream release- Fix creating i686 guest with x86_64 emulator (bz #1153797) - Fix tests with latest libxml2- Fix selinux errors with /dev/net/tun (bz #1147057)- Fix specifying CPU for qemu aarch64- Fix labelling host devices (bz #1145968)- Fix specifying CPU for qemu aarch64- Don't mess up labelling of /dev/net/tun (bz #1141879) - pflash/nvram support for UEFI/OVMF- Fix preun script (bz #1142367)- Generate non-colliding network IP range at RPM install time (bz #811967) - Fix directory creation at session daemon startup (bz #1139672) - Disable wireshark building, currently broken on f21/rawhide- Update to 1.2.8 release- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild- Rebased to version 1.2.7- Enable kvm on aarch64 - Cleanup F-16/18 conditionals- Update to 1.2.6 release- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild- Update to 1.2.5 release- Update to 1.2.4 release- Fix LXC from throwing error System lacks NETNS support (bz #1084902)- Rebased to version 1.2.3- Rebuild for xen 4.4- Update to 1.2.2 release - Add wireshark plugin sub-RPM - Add missing sub-RPMs deps for config packages- Rebuild for openwsman soname bump- Update to 1.2.1 release- Update to 1.2.0 release with python in a separate srpm- virsh nodedev-detach fails if device has no driver (bz #1028629)- upstream release of 1.1.4 - Add support for AArch64 architecture - Various improvements on test code and test driver - a lot of bug fixes and various improvements- Allow QoS change with update-device (bz #1014200) - Fix nwfilter crash during firewalld install (bz #1014762) - Fix crash with nographics (bz #1014088)- VMware: Initial VMware Fusion support and various improvements - libvirt: add new public API virConnectGetCPUModelNames - various libxl driver improvements - LXC many container driver improvement - ARM cpu improvements - a lot of bug and leak fixes and various improvements- Fix snapshot restore when VM has disabled usb support (bz #1011520)- Sync with v1.1.2-maint - Rebuild for libswan soname bump (bz #1009701) - CVE-2013-4311: Insecure polkit usage (bz #1009539, bz #1005332) - CVE-2013-4296: Invalid free memory stats (bz #1006173, bz #1009667) - CVE-2013-4297: Invalid free in NBDDeviceAssociate (bz #1006505, bz #1006511) - Fix virsh block-commit abort (bz #1010056)- Rebuild for soname break in openswman package- Update to 1.1.2 release- Fix launching ARM guests on x86 (patches posted upstream, F20 feature)- CVE-2013-4239: xen: memory corruption in legacy driver (bz #996241, bz- Update to 1.1.1 release- fix doc path in libvirt-python- CVE-2013-4153: Fix double free of returned JSON (bz #986408, bz #986383) - CVE-2013-4154: Crash of libvirtd if guest agent not configured (bz #986386, bz #986406)- Rebuild for change in Xen library ABI/soname- CVE-2013-2230 libvirt: multiple registered events crash- CVE-2013-2218: Fix crash listing network interfaces with filters - Fine grained ACL support for the API - Extensible migration APIs - various improvements in the Xen driver - agent based vCPU hotplug support - various bug fixes and improvements including localizations- Enable KVM support on ARM- Drop bogus dep on vbox- Update to 1.0.6 release- Rebased to version 1.0.5.1 - Follow updated packaging guidelines for user alloc (bz #924501) - CVE-2013-1962 Open files DoS (bz #963789, bz #953107)- Fix stream operations like screenshot (bz #960879)- Fix network driver when using qemu:///session (bz #958907).- Update to 1.0.5 release - add support for NVRAM device - Add XML config for resource partitions - Add support for TPM - NPIV storage migration support - various bug fixes and improvements including localizations- Update to 1.0.4 release- Update to 1.0.3 release- Backport "qemu: check backing chains even when cgroup is omitted" (RHBZ#896685). - Disable virnettlscontexttest which apparently fails because of a broken gnutls3. Note since this patch touches Makefile.am, I have enabled autoreconf (enable_autotools).- Fix missing python binding constants- Update to 1.0.2 release- Fix network persistence after define (bz #890492)- CVE-2013-0170 libvirt: use-after-free in virNetMessageFree() (bz #893450, bz- Rebuild for libnl soname breakage (RHBZ#901569).- Rebuild for libnl3 soname change - Deal with broken kernel headers- Fix scriplet warning when uninstalling libvirt-client (bz #888071)- Update to 1.0.1 release- Update to 1.0.0 release- Disable libxl on F18 too- Rebased to version 0.10.2.1 - Fix lvm volume creation when alloc=0 (bz #866481) - Clarify virsh send-keys man page example (bz #860004) - Fix occasional deadlock via virDomainDestroy (bz #859009) - Fix LXC deadlock from ctrl-c (bz #848119) - Fix occasional selinux denials with macvtap (bz #798605) - Fix multilib conflict with systemtap files (bz #831425) - Don't trigger keytab warning in system logs (bz #745203) - Fix qemu domxml-2-native NIC model out (bz #636832) - Fix error message if not enough space for lvm vol (bz #609104)- Disable libxl driver, since it doesn't build with xen 4.2 in rawhide- Re-add Use-qemu-system-i386-as-binary-instead-of-qemu.patch NB: This patch is Fedora-specific and not upstream. - Add upstream patches: don't duplicate environment variables (RHBZ#859596).- Upstream release 0.10.2 - network: define new API virNetworkUpdate - add support for QEmu sandbox support - blockjob: add virDomainBlockCommit - New APIs to get/set Node memory parameters - new API virConnectListAllSecrets - new API virConnectListAllNWFilters - new API virConnectListAllNodeDevices - parallels: add support of containers to the driver - new API virConnectListAllInterfaces - new API virConnectListAllNetworks - new API virStoragePoolListAllVolumes - Add PMSUSPENDED life cycle event - new API virStorageListAllStoragePools - Add per-guest S3/S4 state configuration - qemu: Support for Block Device IO Limits - a lot of bug fixes, improvements and portability work- Add (upstream) patches to label sockets for SELinux (RHBZ#853393).- Fix for 32 bit qemu renamed to qemu-system-i386 (RHBZ#857026).- Fix libvirtd segfault with old netcf-libs (bz 853381) - Drop unneeded dnsmasq --filterwin2k - Fix unwanted connection closing, needed for boxes- Remove dep on ceph RPM (rhbz #854360)- upstream release of 0.10.1 - many fixes from 0.10.0- upstream release of 0.10.0 - agent: add qemuAgentArbitraryCommand() for general qemu agent command - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions - network: use firewalld instead of iptables, when available - network: make network driver vlan-aware - esx: Implement network driver - driver for parallels hypervisor - Various LXC improvements - Add virDomainGetHostname - a lot of bug fixes, improvements and portability work- release candidate 1 of 0.10.0- Enable autotools to make previous patch work- fix security driver missing from the daemon- snapshot before 0.10.0 in a few weeks - adds the parallel driver support- Add upstream patch to fix RHBZ#842114.- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild- S390: support for s390(x) - snapshot: implement new APIs for esx and vbox - snapshot: new query APIs and many improvements - virsh: Allow users to reedit rejected XML - nwfilter: add DHCP snooping - Enable driver modules in libvirt RPM - Default to enable driver modules for libvirtd - storage backend: Add RBD (RADOS Block Device) support - sVirt support for LXC domains inprovement - a lot of bug fixes, improvements and portability work- qemu: allow snapshotting of sheepdog and rbd disks - blockjob: add new APIs - a lot of bug fixes, improvements and portability work- Rebased to version 0.9.11.3 - Abide URI username when connecting to hypervisor (bz 811397) - Fix managed USB mode (bz 814866) - Fix crash connecting to ESX host (bz 811891)- Update to 0.9.11 release- Revert previous change- Refactor RPM spec to allow install without default configs- Rebuild for libparted soname break- Update to 0.9.10- Fix LXC I/O handling- Add API virDomain{S,G}etInterfaceParameters - Add API virDomain{G, S}etNumaParameters - Add support for ppc64 qemu - Support Xen domctl v8 - many improvements and bug fixes- Fix install of libvirt-guests.service & libvirtd.service- Add support for QEMU 1.0 - Add preliminary PPC cpu driver - Add new API virDomain{Set, Get}BlockIoTune - block_resize: Define the new API - Add a public API to invoke suspend/resume on the host - various improvements for LXC containers - Define keepalive protocol and add virConnectIsAlive API - Add support for STP and VLAN filtering - many improvements and bug fixes- Remove versioned buildreq for yajl as 2.0.x features are not required.- Rebuild for yajl 2.0.1- Update to 0.9.7 release- xenlight available only on Xen arches (#745020)- Make PCI multifunction support more manual - Bug 742836 - F15 build still uses cgconfig - Bug 738725- Fix the qemu reboot bug and a few others bug fixes- many snapshot improvements (Eric Blake) - latency: Define new public API and structure (Osier Yang) - USB2 and various USB improvements (Marc-André Lureau) - storage: Add fs pool formatting (Osier Yang) - Add public API for getting migration speed (Jim Fehlig) - Add basic driver for Microsoft Hyper-V (Matthias Bolte) - many improvements and bug fixes- network bandwidth QoS control - Add new API virDomainBlockPull* - save: new API to manipulate save file images - CPU bandwidth limits support - allow to send NMI and key event to guests - new API virDomainUndefineFlags - Implement code to attach to external QEMU instances - bios: Add support for SGA - various missing python binding - many improvements and bug fixes- xenlight available only on Xen arches- Add ARM to NUMA platform excludes- new API virDomainGetVcpupinInfo - Add TXT record support for virtual DNS service - Support reboots with the QEMU driver - New API virDomainGetControlInfo API - New API virNodeGetMemoryStats - New API virNodeGetCPUTime - New API for send-key - New API virDomainPinVcpuFlags - support multifunction PCI device - lxc: various improvements - many improvements and bug fixes- Rebuild because of libparted soname bump (libparted.so.0 -> libparted.so.1).- add rule to require netcf-0.1.8 during build so that new transactional network change APIs are included. - document that CVE-2011-2178 has been fixed (by virtue of rebase to 0.9.2 - see https://bugzilla.redhat.com/show_bug.cgi?id=709777)- Framework for lock manager plugins - API for network config change transactions - flags for setting memory parameters - virDomainGetState public API - qemu: allow blkstat/blkinfo calls during migration - Introduce migration v3 API - Defining the Screenshot public API - public API for NMI injection - Various improvements and bug fixes- Add upstream patches: 0001-json-Avoid-passing-large-positive-64-bit-integers-to.patch 0001-qemudDomainMemoryPeek-change-ownership-selinux-label.patch 0002-remote-remove-bogus-virDomainFree.patch so that users can try out virt-dmesg. - Change /var/cache mode to 0711.- support various persistent domain updates - improvements on memory APIs - Add virDomainEventRebootNew - various improvements to libxl driver - Spice: support audio, images and stream compression - Various improvements and bug fixes- Support cputune cpu usage tuning - Add public APIs for storage volume upload/download - Add public API for setting migration speed on the fly - Add libxenlight driver - qemu: support migration to fd - libvirt: add virDomain{Get,Set}BlkioParameters - setmem: introduce a new libvirt API (virDomainSetMemoryFlags) - Expose event loop implementation as a public API - Dump the debug buffer to libvirtd.log on fatal signal - Audit support - Various improvements and bug fixes- fix a lack of API check on read-only connections - CVE-2011-1146- Fix kernel boot with latest QEMU- expose new API for sysinfo extraction - cgroup blkio weight support - smartcard device support - qemu: Support per-device boot ordering - Various improvements and bug fixes- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild- Preliminary support for VirtualBox 4.0 - IPv6 support - Add VMware Workstation and Player driver driver - Add network disk support - Various improvements and bug fixes - from 0.8.6: - Add support for iSCSI target auto-discovery - QED: Basic support for QED images - remote console support - support for SPICE graphics - sysinfo and VMBIOS support - virsh qemu-monitor-command - various improvements and bug fixes- Enable JSON and netdev features in QEMU >= 0.13 - framework for auditing integration - framework DTrace/SystemTap integration - Setting the number of vcpu at boot - Enable support for nested SVM - Virtio plan9fs filesystem QEMU - Memory parameter controls - various improvements and bug fixes- Rebuilt for gcc bug 634757- disable the nwfilterxml2xmltest also on s390(x)- Upstream release 0.8.4- Fix potential overflow in boot menu code- Upstream release 0.8.3- Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild- CVE-2010-2237 ignoring defined main disk format when looking up disk backing stores - CVE-2010-2238 ignoring defined disk backing store format when recursing into disk image backing stores - CVE-2010-2239 not setting user defined backing store format when creating new image - CVE-2010-2242 libvirt: improperly mapped source privileged ports may allow for obtaining privileged resources on the host- Upstream release 0.8.2 - phyp: adding support for IVM - libvirt: introduce domainCreateWithFlags API - add 802.1Qbh and 802.1Qbg switches handling - Support for VirtualBox version 3.2 - Init script for handling guests on shutdown/boot - qemu: live migration with non-shared storage for kvm- Upstream release 0.8.1 - Starts dnsmasq from libvirtd with --dhcp-hostsfile - Add virDomainGetBlockInfo API to query disk sizing - a lot of bug fixes and cleanups- Upstream release 0.8.0 - Snapshotting support (QEmu/VBox/ESX) - Network filtering API - XenAPI driver - new APIs for domain events - Libvirt managed save API - timer subselection for domain clock - synchronous hooks - API to update guest CPU to host CPU - virDomainUpdateDeviceFlags new API - migrate max downtime API - volume wiping API - and many bug fixes- No change, just rebuild against new libparted with bumped soname.- Fix USB devices by product with security enabled (bz 574136) - Set kernel/initrd in security driver, fixes some URL installs (bz 566425)- macvtap support - async job handling - virtio channel - computing baseline CPU - virDomain{Attach,Detach}DeviceFlags - assorted bug fixes and lots of cleanups- libvirt-0.7.6-add-needed.patch: Fix FTBFS from --no-add-needed - Add BuildRequires: xmlrpc-c-client for libxmlrpc_client.so- upstream release of 0.7.6 - Use QEmu new device adressing when possible - Implement CPU topology support for QEMU driver - Implement SCSI controller hotplug/unplug for QEMU - Implement support for multi IQN - a lot of fixes and improvements- bump for libssh2 rebuild- Rebuild for libparted soname change- Add new API virDomainMemoryStats - Public API and domain extension for CPU flags - vbox: Add support for version 3.1 - Support QEMU's virtual FAT block device driver - a lot of fixes- upstream release of 0.7.4 - udev node device backend - API to check object properties - better QEmu monitor processing - MAC address based port filtering for qemu - support IPv6 and multiple addresses per interfaces - a lot of fixes- Really fix restore file labelling this time- Disable numactl on s390[x]. Again.- Fix QEMU save/restore permissions / labelling- Avoid compressing small log files (#531030)- Make libvirt-devel require libvirt-client, not libvirt - Fix qemu machine types handling- Upstream release of 0.7.2 - Allow to define ESX domains - Allows suspend and resulme of LXC domains - API for data streams - many bug fixes- Fix restore of qemu guest using raw save format (#523158)- Fix libvirtd memory leak during error reply sending (#528162) - Add several PCI hot-unplug typo fixes from upstream- Create /var/log/libvirt/{lxc,uml} dirs for logrotate - Make libvirt-python dependon on libvirt-client - Sync misc minor changes from upstream spec- Change logrotate config to weekly (#526769)- Disable sound backend, even when selinux is disabled (#524499) - Re-label qcow2 backing files (#497131)- Fix USB device passthrough (#522683)- rebuild for libssh2 1.2- Don't set a bogus error in virDrvSupportsFeature() - Fix raw save format- A couple of hot-unplug memory handling fixes (#523953)- disable numactl on s390[x]- revamp of spec file for modularity and RHELs- Upstream release of 0.7.1 - ESX, VBox driver updates - mutipath support - support for encrypted (qcow) volume - compressed save image format for Qemu/KVM - QEmu host PCI device hotplug support - configuration of huge pages in guests - a lot of fixes- Update to newer snapshot of 0.7.1 - Stop libvirt using untrusted 'info vcpus' PID data (#520864) - Support relabelling of USB and PCI devices - Enable multipath storage support - Restart libvirtd upon RPM upgrade- Update to pre-release git snapshot of 0.7.1 - Drop upstreamed patches- Fix migration completion with newer versions of qemu (#516187)- Add PCI host device hotplug support - Allow PCI bus reset to reset other devices (#499678) - Fix stupid PCI reset error message (bug #499678) - Allow PM reset on multi-function PCI devices (bug #515689) - Re-attach PCI host devices after guest shuts down (bug #499561) - Fix list corruption after disk hot-unplug - Fix minor 'virsh nodedev-list --tree' annoyance- Rewrite policykit support (rhbz #499970) - Log and ignore NUMA topology problems (rhbz #506590)- Don't fail to start network if ipv6 modules is not loaded (#516497)- Make sure qemu can access kernel/initrd (bug #516034) - Set perms on /var/lib/libvirt/boot to 0711 (bug #516034)- ESX, VBox3, Power Hypervisor drivers - new net filesystem glusterfs - Storage cloning for LVM and Disk backends - interface implementation based on netcf - Support cgroups in QEMU driver - QEmu hotplug NIC support - a lot of fixes- release of 0.6.5- release of 0.6.4 - various new APIs- release of 0.6.3 - VirtualBox driver- release of 0.6.2- release of 0.6.1- release of 0.6.0- release of 0.5.0- release of 0.4.6- release of 0.4.5- release of 0.4.4 - mostly a few bug fixes from 0.4.3- release of 0.4.3 - lots of bug fixes and small improvements- release of 0.4.2 - lots of bug fixes and small improvements- Release of 0.4.1 - Storage APIs - xenner support - lots of assorted improvements, bugfixes and cleanups - documentation and localization improvements- Release of 0.4.0 - SASL based authentication - PolicyKit authentication - improved NUMA and statistics support - lots of assorted improvements, bugfixes and cleanups - documentation and localization improvements- Release of 0.3.3 - Avahi support - NUMA support - lots of assorted improvements, bugfixes and cleanups - documentation and localization improvements- Release of 0.3.2 - API for domains migration - APIs for collecting statistics on disks and interfaces - lots of assorted bugfixes and cleanups - documentation and localization improvements- Release of 0.3.1 - localtime clock support - PS/2 and USB input devices - lots of assorted bugfixes and cleanups - documentation and localization improvements- Release of 0.3.0 - Secure remote access support - unification of daemons - lots of assorted bugfixes and cleanups - documentation and localization improvements- Release of 0.2.3 - lot of assorted bugfixes and cleanups - support for Xen-3.1 - new scheduler API- Release of 0.2.2 - lot of assorted bugfixes and cleanups - preparing for Xen-3.0.5- don't require xen; we don't need the daemon and can control non-xen now - fix scriptlet error (need to own more directories) - update description text- Release of 0.2.1 - lot of bug and portability fixes - Add support for network autostart and init scripts - New API to detect the virtualization capabilities of a host - Documentation updates- Fix loading of guest & network configs- Disable kqemu support since its not in Fedora qemu binary - Fix for -vnc arg syntax change in 0.9.0 QEMU- Fixed path to qemu daemon for autostart - Fixed generation of block in XML - Pre-create config directory at startup- support for KVM and QEmu - support for network configuration - assorted fixes- finish inactive Xen domains support - memory leak fix - RelaxNG schemas for XML configs- support for inactive Xen domains - improved support for Xen display and vnc - a few bug fixes - localization updates- rebuild against python 2.5- better error reporting - python bindings fixes and extensions - add support for shareable drives - add support for non-bridge style networking - hot plug device support - added support for inactive domains - API to dump core of domains - various bug fixes, cleanups and improvements - updated the localization- it's pkgconfig not pgkconfig !- fixing spec file, added .el6, -devel requires pkgconfig and xen-devel - Resolves: rhbz#202320- fix missing page size detection code for ia64 - fix mlock size when getting domain info list from hypervisor - vcpu number initialization - don't label crashed domains as shut off - fix virsh man page - blktapdd support for alternate drivers like blktap - memory leak fixes (xend interface and XML parsing) - compile fix - mlock/munlock size fixes- Fix bug when running against xen-3.0.3 hypercalls - Fix memory bug when getting vcpus info from xend- Support for localization - Support for new Xen-3.0.3 cdrom and disk configuration - Support for setting VNC port - Fix bug when running against xen-3.0.2 hypercalls - Fix reconnection problem when talking directly to http xend- patch from danpb to support new-format cd devices for HVM guests- reactivating ia64 support- new release - bug fixes - support for new hypervisor calls - early code for config files and defined domains- add patch to address dom0_ops API breakage in Xen 3.0.3 tree- add patch to support paravirt framebuffer in Xen- another patch to fix network handling in non-HVM guests- patch to fix virParseUUID()- vCPUs and affinity support - more complete XML, console and boot options - specific features support - enforced read-only connections - various improvements, bug fixes- add patch from pvetere to allow getting uuid from libvirt- build on ia64 now- don't BR xen, we just need xen-devel- need rebuild since libxenstore is now versionned- Add BuildRequires: xen-devel- rebuild- support for HVM Xen guests - various bugfixes- added a proxy mechanism for read only access using httpu - fixed header includes paths- extend and cleanup the driver infrastructure and code - python examples - extend uuid support - bug fixes, buffer handling cleanups - support for new Xen hypervisor API - test driver for unit testing - virsh --conect argument- various fixes - new APIs: for Node information and Reboot - virsh improvements and extensions - documentation updates and man page - enhancement and fixes of the XML description format- added error handling APIs - small bug fixes - improve python bindings - augment documentation and regression tests- new domain creation API - new UUID based APIs - more tests, documentation, devhelp - bug fixes- fixes some problems in 0.0.3 due to the change of names- changed library name to libvirt from libvir, complete and test the python bindings- upstream release of 0.0.2, use xend, save and restore added, python bindings fixed- created/bin/sh2.2.0-1.el62.2.0-1.el6networksdefault.xml/usr/share/libvirt//usr/share/libvirt/networks/-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=genericcpioxz2x86_64-redhat-linux-gnuASCII textdirectory?`7zXZ !PH6] b2u jӫ`(i"2x*}(.AHRl#tYbt{rYd?׃8/)W;># d!/Zﳌwdb h*;ՈqǑ}J}$[\ZByҢ3rX̮퓫ksSܐv[^0:GĀ@8䥸FdhQ}wD[\DS>f,F}c{><Ѯd)4>gqnhx*ފ4  YZ